Quick details of 24V 60W 2.5A LED driver:

AC/DC switching 24V 60W 2.5A single-switch LED driver

AC input voltage: 90~250VAC

1600V High voltage test, full loading test and old aging test

Constant voltage driver apply for Fair Cabinet/Display Showcase

IP20 grade

CE, ETL approvals

3 Years Warranty

Unit Size: 11*7.8*3.6CM

Unit Weight: 210g

Description of 24V 60W 2.5A LED driver:

Our products are widely used in LED industrial project, communications power, aerospace, industrial control systems, posts communications, medical equipment and other industrial and commercial fields. 

All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

Fair cabinet display showcase power supply is special field, our 24V 24W-400W-1000W series can meet this market and are warm welcomed. It all depends on users’ requirements in electric value.

Specification of 24V 60W 2.5A LED driver:

Notices:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm2

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.

9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof).

Load testing of 24V 60W 2.5A LED driver: