Feature of Linear Indoor(IP20) 24V 60W 2.5A LED driver:

1. Indoor super slim mini shape aluminum housing package.

2. Constant voltage 24V 60W 2.5A single-switch LED driver.

3. AC input voltage 170~250VAC to DC output voltage 24V.

4. 1600V High voltage test, full loading test and old aging test.

5. Apply in LED strips light,light belt,LED module,light box,lamp house.

Specification of Linear Indoor(IP20) 24V 60W 2.5A LED driver:

Notice:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm2

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

Related models of Linear LED driver 24V 60W 2.5A: