Quick Details of IP67 12V 40W 3.3A LED driver:

Waterproof ultra small type 

AC/DC switching 12V 40W 3.3A single-switch LED driver

AC input voltage: 90~130V OR 170-250V

1600V High voltage test, full loading test and old aging test

Constant voltage driver apply in LED light strip, light box, module, signboard light, line light, wall wash light, underground light, protective tube and so on

IP67 grade

CE, ETL approvals

3 Years Warranty

Size: 22.2*3.0*2.0cm 

Weight: 260g

Description of IP67 12V 40W 3.3A LED driver:

Waterproof power supply is used in the case of dust-proof with waterproof grade IP67, with multiple protections such as short circuit, over current, overload and so on.

XDL ultra small waterproof 12V LED drivers have 

20W 1.67A/30W 2.5A/40W 3.3A/50W 4.16A/60W 5A/80W 6.67A

100W 8.3A/120W 10A/150W 12.5A/

200W 16.5A/250W 20A/300W 25A/350W 29A/400W 33A. 

Specification of IP67 12V 40W 3.3A LED driver:

Notices:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm2

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multi-meter (voltage: 220VAC) recognized before it can be closed.

9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)

IP67 LED driver 12V 40W 3.3A related models list:

Application of ultra small IP67 12V 40W 3.3A LED driver:

Mainly used i LED light box, LED module light , LED signboard light, LED bulbs, LED buried lights, LED sky lights, LED flat lights, LED wall washing lights and other LED lamps to provide driving capacity. The most important feature is that it is waterproof and can be used outdoors without fear of rain, fog, direct sunlight and other harsh environments.