Feature of 5V 40A 200W Indoor(IP20) LED driver:

1.Aluminum housing package AC/DC 5V 200W 40A switch power LED driver.

2. AC input voltage 170~250VAC 90~130VAC with excellent natural cooling function.

3. 1600V High voltage test, full loading test and old aging test

4. Constant voltage led driver apply for led display.perforated light.led module

Description of 5V 40A 200W Indoor(IP20) LED driver:

Constant voltage power supply is power circuit that controls output voltage at a constant level. It always provides a constant voltage regardless of the load and is widely used as power supply for electronic circuits.

5V Indoor series mainly have three models-200W, 300W, 350W and so on, They are mainly used for LED display, punch light/lamp, LED module and so on.

Specification of 5V 40A 200W Indoor(IP20) LED driver:

Notices of 5V 40A 200W Indoor(IP20) LED driver:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm2

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multi-meter (voltage: 220VAC) recognized before it can be closed.

9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof).

Application of 5V 40A 200W Indoor(IP20) LED driver: